🐧Fixing Persistent Ethernet Interface Naming Problems on Debian Buster🦚

When dealing with multiple Ethernet controllers on Debian 10, interface naming issues can arise, particularly if two controllers have non-persistent interface names. This guide walks through resolving such issues by making interface names persistent based on MAC addresses.

---

Problem Overview

In a typical scenario:

• First controller: Has six interfaces (e.g., eth0 to eth5), each with consecutive MAC addresses.

• Second controller: Has two interfaces (eth6 and eth7).

The problem arises when the second controller's interface names are not consistent across reboots. This can cause networking services to fail if they depend on specific interface names.

---

Step-by-Step Solution

1. Identify MAC Addresses

Use the ip a command to list all network interfaces and their MAC addresses:

ip a

Note the MAC addresses associated with the interfaces. For example:

• First controller: eth0 through eth5, with MAC addresses like 04:2b:58:0f:8f:90 to 04:2b:58:0f:8f:95.

• Second controller: eth6 and eth7, with MAC addresses 04:2b:58:0f:9d:e0 and 04:2b:58:0f:9d:e1.

3. Create a Persistent Naming Rule

Define rules for persistent naming by creating a file in /etc/udev/rules.d/:

sudo nano /etc/udev/rules.d/70-persistent-net.rules

Add the following rules, replacing the example MAC addresses with the actual addresses from your system:

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="04:2b:58:0f:9d:e0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth6"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="04:2b:58:0f:9d:e1", ATTR{type}=="1", KERNEL=="eth*", NAME="eth7"

4. Reboot the System

Reboot to apply the new udev rules:

sudo reboot

5. Verify Persistent Interface Names

After reboot, verify that the interfaces eth6 and eth7 have been correctly assigned to the MAC addresses:

ip a

6. Double-Check with ethtool

Verify the MAC address assignments to ensure accuracy:

sudo ethtool -i eth6
sudo ethtool -i eth7

This confirms the interface is correctly linked to the MAC address. If the interface are SFP/+ then you should also be able to query the module details.

Confirm that the names are consistent and match the MAC addresses configured in the udev rules.

---

Troubleshooting

• If the interfaces do not appear as expected, check the udev rule syntax and ensure no conflicts exist in /etc/udev/rules.d/.

• Use udevadm to debug:

    sudo udevadm test /sys/class/net/eth6
    sudo udevadm test /sys/class/net/eth7
  

---

Wrap

By defining persistent naming rules based on MAC addresses, you can ensure consistent interface names for your network controllers. This solution is robust for systems with multiple Ethernet controllers, providing stability for networking configurations across reboots.

---