Bluetooth Chip PHY6222 Application in Laifen Electric Toothbrush: Details, Reasons for Selection, and Alternatives

Junluan TsuiJunluan Tsui
3 min read

I. Introduction

Recently, the electric toothbrush product to be launched by the Chinese manufacturer Laifen has caught my attention.

As a loyal fan of Laifen, I highly appreciate this brand. Although its high - speed hair dryer may seem to be imitating Dyson, it has actually promoted the overall optimization of the Chinese hair dryer industry. Consumers can get a much - better - performing product with a slightly higher cost.

The brand's marketing approach, technology - sharing culture, and accurate identification of product pain points are all worthy of in - depth study.

I'm looking forward to the electric toothbrush launched at Laifen's official press conference. I will definitely buy it for experience once it's on the market. Even if it might be considered as paying an "IQ tax", I'm willing to give it a try.

As an engineer, I'm more concerned about the Bluetooth chip used in this product.

文章内容

Although I think adding Bluetooth functionality to an electric toothbrush has little practical significance as consumers usually only use it to connect to the app for parameter settings once and rarely connect again, the manufacturer must have its own considerations.

PHY6222 Bluetooth Chip

The PHY6222 is a System - on - Chip (SoC) that supports BLE 5.2 functionality and the IEEE 802.15.4 communication protocol. It integrates an ultra - low - power high - performance multi - mode radio transceiver, is equipped with a 32 - bit ARM®Cortex™ - M0 processor, and provides 64K retention SRAM, optional 128K - 8M Flash, 96KB ROM, and 256 - bit efuse. It supports security architectures, applications, and OTA online upgrades based on BLE and IEEE 802.15.4. In addition, the chip's serial peripheral IO and integrated application program IP help customers develop their products with the minimum BOM cost.

It adopts a standard QFN32 package.

文章内容

Guesses on Why Laifen Chose PHY6222

  1. Recommended by the Solution Company: The PHY6222 has good performance, but its cost is relatively high.

  2. Platform Access Considerations: When designing the solution, they considered accessing systems such as mesh, Tmall, and Mi Home. Since the PHY6222 had already been integrated into these platforms, they initially chose this chip, although they later gave up and developed their own platform app.

  3. Project Planning Factors: When planning the project two years ago, considering performance, cost, and power consumption comprehensively, the PHY6222 was the most suitable chip, so they chose it.

  4. Recommended by the Manufacturer: However, this possibility is relatively small because they were a small manufacturer at the beginning, and it was difficult for the manufacturer to foresee their development potential.

Final Recommendation

From the current perspective, the main purpose of adding Bluetooth functionality to an electric toothbrush is to connect the interaction between the mobile phone and the toothbrush. Therefore, when choosing a chip, the following aspects should be focused on:

  1. Power Consumption: The Bluetooth part of the toothbrush needs to broadcast continuously, so high power consumption is not acceptable.

  2. Cost: Cost control is always crucial for consumer products.

  3. Cooperative Relationship: The original supplier system is usually given priority. Even if the cost is slightly higher, as long as the service is good, it's acceptable.

文章内容

Based on this, we highly recommend the KT6368A dual - mode Bluetooth chip, which adopts an SOP8 package. The KT6368A chip supports dual - mode Bluetooth and is of Bluetooth 5.1 version. Its highlights include ultra - small size, affordable price, and simple and clear transparent transmission and serial port AT control functions, which greatly reduce the development difficulty and cost of embedding Bluetooth in other products.

This chip is a low - power version, and its average power consumption can be controlled at around 200uA.

文章内容

The minimum test system for chips

文章内容

Product details, product information, and sample acquisition and ordering links: KT6368A

0
Subscribe to my newsletter

Read articles from Junluan Tsui directly inside your inbox. Subscribe to the newsletter, and don't miss out.

Written by

Junluan Tsui
Junluan Tsui