Category: Tapes
URL: https://sanaco.com.sa/product-category/tapes/

When projects slip, it is rarely the big switchgear that fails. It is the small interface: a splice that wasn’t sealed, a thread that leaked, a harness that chafed. The right Industrial Tapes closes risk gaps you cannot afford in control panels, MEP installs, and OEM harnessing. This page helps you pick the correct tape, deploy it correctly, and standardize your bill of materials for repeatable quality.

Why buy your tapes here

Full category coverage across electrical PVC tapes, PTFE thread‑sealing tapes, self‑fusing silicone, warning/barrier, glass‑cloth high‑temp, easy‑tear, double‑sided, pipe wrapping, putty, and waterproof SKUs.
Panel‑grade options suitable for screw‑ or spring‑clamp terminal blocks, conduit terminations, cable harness bundling, and quick service repairs.
Brand choice to match spec and budget, including HI‑TECH, UNITED POWER, and MARTEL.
KSA‑ready checkout and payment methods for teams in the Kingdom.

Tip: Orders over a certain threshold ship free in KSA; plan replenishment by project stage to minimize freight and downtime.

Tape types you’ll find in this category

1) Electrical PVC Insulation Tapes

Use for: Primary insulation repairs, color coding, harness bundling, phase marking.
Core traits: Flame‑retardant PVC, pressure‑sensitive adhesive, flexible at low temps, typical working spec around ≤600 V and ~80 °C depending on SKU.
Installation: Wipe dust/oil. Apply with 50% overlap under gentle stretch, then finish with a reverse‑wrap tail to lock the end. For sharp edges, radius the corner or add a first layer of mastic.

2) Self‑Fusing (Self‑Amalgamating) Silicone Tapes

Use for: Moisture‑proof splices, emergency hose repairs, outdoor antenna terminations, corrosion sleeves on fasteners.
Core traits: No adhesive; bonds to itself under stretch to form a unified rubber sleeve, excellent water and ozone resistance, wide temperature window.
Installation: Stretch to 2×–3× original length and overlap by 50–70%. End with a full‑tension wrap and hold for 30–60 s to initiate fusion.

3) PTFE Thread‑Sealing (Teflon) Tapes

Use for: Threaded pipe joints in water, air, and many chemical service lines.
Core traits: PTFE film, non‑hardening, non‑messy, chemically inert; aids assembly and disassembly.
Installation: Wrap with the thread direction, 7–12 turns for standard BSP/NPT small sizes; keep 1 thread from the end to reduce shred risk. For stainless threads, add a thin jointing paste if allowed by spec.

4) Warning / Barricade Tapes

Use for: Visual hazard demarcation at sites, crowd control lanes, low‑level perimeter marking.
Core traits: High‑visibility colorways (e.g., yellow/black), lightweight film, quick deploy and retrieve.
Installation: Tie‑off at eye‑level posts every 3–5 m; maintain clear sightlines; replace if color fades.

5) Glass‑Cloth High‑Temperature Tapes

Use for: Heat zones, motor/transformer tie‑downs, coil insulation class H contexts, and masking where ordinary PVC fails.
Core traits: Woven fiberglass carrier with heat‑resistant adhesive, resists fray and maintains tensile strength at elevated temperatures.

6) Easy‑Tear Utility Tapes

Use for: Fast bundling and temporary labeling where blades are restricted.
Core traits: Balanced film strength and hand‑tearability; useful for field tech kits.

7) Double‑Sided Tapes

Use for: Panel labeling plates, light trims, cable markers, foam‑to‑metal interfaces.
Core traits: Acrylic or rubber adhesives; some SKUs deliver higher shear for hot surfaces or textured substrates.

8) Pipe‑Wrapping Tapes

Use for: Protective corrosion wrap on exposed pipe sections and fittings.
Core traits: Tough carrier and aggressive adhesive; chooses thickness based on exposure and soil class.

9) Putty/Sealant Tapes

Use for: Gap filling, EMI shielding prep layers, and weather‑seal transitions around enclosures.
Core traits: Butyl or similar formulations; non‑curing and conformable.

10) Waterproof Repair Tapes

Use for: Quick gasket‑like repairs, roof or duct patches, and moisture barriers on the fly.
Core traits: High‑tack adhesive and barrier film; apply on dry, clean surfaces for best results.

Selection guide: from use case to SKU in under 2 minutes

Function: Insulate | Seal threads | Waterproof | Warn | Bundle | Bond.
Environment: Temperature (‑10 to 90+ °C?), UV, water/splash, oils, dust.
Substrate: PVC jacket, XLPE, copper/aluminum, steel, painted sheet, masonry.
Mechanical stress: Vibration, abrasion, flex cycles per day.
Regulatory/plant rule: UL/IEC label where required, color code for phases or safety zones.

Quick matches

Insulate + harness: Electrical PVC tapes.
Seal pipe threads: PTFE tapes.
Waterproof outdoor splice: Self‑fusing silicone.
High heat: Glass‑cloth.
Site safety: Warning tapes.
Permanently bond a faceplate: Double‑sided.
Corrosion protection on fittings: Pipe‑wrap.
Patch and keep rain out: Waterproof repair tapes.

Field installation playbook

Electrical PVC: Clean, dry, 50% overlap, moderate stretch. Reverse‑lock the tail. For cable to lug transitions, pre‑build a stress cone.
Self‑fusing: Max performance only under high stretch; avoid grease; allow a few minutes for initial set before energizing.
PTFE: Wrap with thread direction; the first turn sets alignment; keep wraps flat with no fish‑eyes.
Glass‑cloth: Avoid over‑tension that distorts weave; burnish edges to seat adhesive.
Double‑sided: Degrease both faces; apply pressure \>10 N/cm for 5–10 seconds to wet‑out adhesive.
Warning tapes: Position for sightlines; refresh if color contrast drops.
Waterproof: Prime porous substrates; avoid entrapped air; roll down firmly.

Specs that matter and how to read them

Dielectric strength (kV/mm): For insulation tapes, correlates with safe working voltage and wrap layers.
Temperature rating: PVC often around 80 °C; glass‑cloth and silicone tapes go higher.
Adhesion to steel (N/25 mm): Higher = stronger bond; check need for clean removal.
Tensile strength (N/25 mm): Harness stability and abrasion resistance.
Elongation (%): Conformability around bends; self‑fusing requires high elongation.
UV/chemical resistance: Outdoor and plant environments.
Thickness (mil/µm): Thicker = better gap‑fill and abrasion; thinner = neater finish.

Quality system for your projects

Standardize colors for phase, neutral, earth, and control voltages.
Create a kit list per panel: 1× electrical tapes (black), 1× color set, 1× self‑fusing, 1× PTFE, 1× double‑sided, 1× warning tape.
Incoming inspection: Randomly test adhesion/tensile on a 100 mm strip; log batch/lot codes.
Field audits: Thermal imaging on repaired joints; replace tapes showing edge lift or chalking.
End‑of‑job checklist: Confirm labels remain legible; re‑tension harnesses and replace damaged wraps.

Sector‑specific guidance

Industrial automation: Maintain a drawer of glass‑cloth and self‑fusing for hot zones and outdoor conduits.
Commercial MEP: Stock PTFE for plumbers, electrical PVC for techs, warning tapes for safety officers.
Renewables (LV DC): Prioritize UV‑resistant wraps and self‑fusing for combiner boxes.
OEM harnessing: Pre‑cut tape lengths for repeatability; use easy‑tear for speed stations and double‑sided for trim fixtures.

Frequently asked questions

Q: Can I use electrical PVC tapes as a long‑term primary insulation?
A: Yes when applied properly and within its voltage/temperature rating. For wet/underground splices, over‑wrap with self‑fusing silicone and an outer UV‑resistant jacket.

Q: How many wraps of PTFE tapes are correct?
A: Typically 7–12 wraps on small threads; increase slightly for coarse threads or stainless. Always wrap in the tightening direction.

Q: Will self‑fusing tapes leave residue?
A: No adhesive means clean removal. Cut lengthwise to open the sleeve when servicing.

Q: What if a harness runs hot?
A: Switch to higher‑temp glass‑cloth or silicone; de‑rate nearby loads; ensure clearance from sharp edges.

Q: Can warning tapes replace rigid barriers?
A: No. It is a visual cue, not a structural barrier. Use it alongside cones, fencing, or guards.

Why SANA for tapes

Multiple brands and sub‑types in one catalog to simplify procurement.
KSA‑friendly payments and customer service.
Free‑shipping threshold that rewards consolidated orders.
Project‑grade advice: Pair tapes with related categories like heat‑shrink tubing, glands, and terminations to raise first‑time‑right rates.

Call to action

Build it once. Build it right. Add the tapes you need to your cart now, or message us for a quick BOM check and size matching.

Shop now: https://sanaco.com.sa/product-category/tapes/

Industrial Tapes for Electrical, MEP, and OEM — Choose Right, Build Faster, Reduce Rework