Media CDN: Qwik Start - GSP1044

Overview

Media CDN is Google Cloud's media delivery solution. Media CDN complements Cloud CDN, which is Google Cloud's web acceleration solution. Media CDN is optimized for high-throughput egress workloads, such as streaming video and large file downloads.

An edge cache is typically server infrastructure that stores content closer to end users, located within points of presence (PoPs) or partner ISPs. Media CDN uses Google's global edge-caching infrastructure to serve your content as close to your users as possible. By using Google's infrastructure to serve content, you can reduce load on your origin infrastructure.

Media CDN lets you easily fetch content from publicly accessible HTTP endpoints. You can use Media CDN with your existing origin infrastructure, whether the content is hosted within Cloud Storage, in another cloud, or within your on-premises infrastructure.

You can control how content is cached for each URI you serve in a route. Using a route lets you optimize behavior based on the type of content, client attributes, and your freshness requirements for each route you define with Media CDN.

Objectives

In this lab, you will:

• Set up Media CDN in front of a Cloud Storage bucket

• Retrieve the IP address

• Test caching

Setup and Requirements

Before you click the Start Lab button

Read these instructions. Labs are timed and you cannot pause them. The timer, which starts when you click Start Lab, shows how long Google Cloud resources will be made available to you.

This hands-on lab lets you do the lab activities yourself in a real cloud environment, not in a simulation or demo environment. It does so by giving you new, temporary credentials that you use to sign in and access Google Cloud for the duration of the lab.

To complete this lab, you need:

• Access to a standard internet browser (Chrome browser recommended).

Note: Use an Incognito or private browser window to run this lab. This prevents any conflicts between your personal account and the Student account, which may cause extra charges incurred to your personal account.

• Time to complete the lab---remember, once you start, you cannot pause a lab.

Note: If you already have your own personal Google Cloud account or project, do not use it for this lab to avoid extra charges to your account.

How to start your lab and sign in to the Google Cloud console

1. Click the Start Lab button. If you need to pay for the lab, a pop-up opens for you to select your payment method. On the left is the Lab Details panel with the following:

   • The Open Google Cloud console button

   • Time remaining

   • The temporary credentials that you must use for this lab

   • Other information, if needed, to step through this lab

2. Click Open Google Cloud console (or right-click and select Open Link in Incognito Window if you are running the Chrome browser).

   The lab spins up resources, and then opens another tab that shows the Sign in page.

   Tip: Arrange the tabs in separate windows, side-by-side.

   Note: If you see the Choose an account dialog, click Use Another Account.

3. If necessary, copy the Username below and paste it into the Sign in dialog.

    student-00-abd43b6494c9@qwiklabs.net
   

   You can also find the Username in the Lab Details panel.

4. Click Next.

5. Copy the Password below and paste it into the Welcome dialog.

    Bd8MPhemuQqI
   

   You can also find the Password in the Lab Details panel.

6. Click Next.

   Important: You must use the credentials the lab provides you. Do not use your Google Cloud account credentials.

   Note: Using your own Google Cloud account for this lab may incur extra charges.

7. Click through the subsequent pages:

   • Accept the terms and conditions.

   • Do not add recovery options or two-factor authentication (because this is a temporary account).

   • Do not sign up for free trials.

After a few moments, the Google Cloud console opens in this tab.

Note: To view a menu with a list of Google Cloud products and services, click the Navigation menu at the top-left.

Task 1 - Enable Required Services

To configure and deploy Media CDN services, you need to enable both the Network Services API and the Certificate Manager API in your project.

1. In the Google Cloud Console, navigate to Navigation menu > APIs & Services > Library.

2. Search for Network Services API.

3. Click on the API and click Enable.

4. Repeat steps 1-3 to enable the Certificate Manager API.

Click Check my progress to verify your performed task.

Enable Required Services.

Task 2 - Create a Bucket with public access

1. In the Google Cloud Console, navigate to Navigation menu > Cloud Storage > Buckets.

2. Click Create Bucket.

3. For Name your bucket, enter qwiklabs-gcp-03-d835c84f3ef3.

4. Leave all other fields with their default value and click Create.

5. Click Confirm for the Public access will be prevented pop-up.

6. After the bucket has been created, click Permissions.

7. Click Remove Public Access Prevention and then click Confirm.

8. Click +Grant Access.

9. In New principals, type allUsers then select the choice from the dropdown menu.

10. For role, select Cloud Storage > Storage Object Viewer.

11. Click Save.

12. Click Allow public access.

Click Check my progress to verify your performed task.

Create a Bucket with public access.

Task 3 - Create an Origin

An EdgeCacheOrigin represents a content location, such as a Cloud Storage bucket, a third-party storage location, or a load balancer.

In this case, you create an origin that maps to your Cloud Storage bucket named qwiklabs-gcp-03-d835c84f3ef3.

1. In the Navigation menu, View All Products navigate to Network services > Network services > Cloud CDN.

2. Click Add Origin.

3. For Origin type, select Backend bucket.

4. For Define your backend bucket, click Browse, click qwiklabs-gcp-03-d835c84f3ef3 and click Select.

5. For Origin Name, type cloud-storage-origin.

6. Click Next.

7. For Attach a load balancer, select Create new load balancer for me.

8. For Load Balancer name, type cloud-storage-origin-load-balancer.

9. Click Next and click Done.

Click Check my progress to verify your performed task.

Create an Origin.

---

Solution of Lab

curl -LO raw.githubusercontent.com/ePlus-DEV/storage/refs/heads/main/labs/GSP1044/lab.sh
sudo chmod +x lab.sh
./lab.sh

Script Alternative

curl -LO raw.githubusercontent.com/quiccklabs/Labs_solutions/refs/heads/master/Media%20CDN%20Qwik%20Start/quicklabgsp1044.sh
sudo chmod +x quicklabgsp1044.sh
./quicklabgsp1044.sh

Open: https://console.cloud.google.com/net-services/cdn/add

1. For Origin type, select Backend bucket.

2. For Define your backend bucket, click Browse, click qwiklabs-gcp-03-d835c84f3ef3 and click Select.

3. For Origin Name, type cloud-storage-origin.

4. Click Next.

5. For Attach a load balancer, select Create new load balancer for me.

6. For Load Balancer name, type cloud-storage-origin-load-balancer.

7. Click Next and click Done.